Restoration Local Advantage 1-888-443-3110
- 24/7 Rapid Response & Free Estimates!
- Flooded Basement Restoration Services
- Sewer Clean Up and Restoration
- Emergency Water Damage Clean Up. Get A Response in 60 Minutes.
Keeping Mold Out of The Laundry Room
When there is mold in your laundry room, the sources are easily identifiable and treatable. There are many steps you can take to prevent mold and remove mold when you take the time to maintain your home properly. Mold is composed of many different types of fungi. Some species can be destructive to your health and others can harm the integrity of your home. All of the variants of these molds are numerous and the easiest way to avoid mold is to regularly take preventative steps in order to keep mold out of your home. The easiest way to start caring for a room is to ensure proper ventilation and humidity levels. You can do this by regulating humidity to around 50% or lower. A dehumidifier can be used, in addition or as a replacement for windows, a fan, or good ventilation systems. One useful tip for high-humidity areas is to use a semi gloss paint that has mildew agents mixed in
The major areas in a laundry room that produce mold are common. The washer and drying machines in addition to the sink and drying areas all deal with water in some form. Anywhere water is present is an area that might have suffered from water damage, either from leaks or build up or simply from excessive moisture. A few simple practices can help prevent mold build up. For example, when washing clothes, remove them immediately after the cycle finishes and hang them up or dry them. Leaving wet clothes sitting can produce mildew or other undesirable molds that you can notice from the foul smell in your freshly cleaned clothes. Allow time for your fabrics to completely dry before storing them to avoid mildew build up. After a cycle, leave the door of your machine open, to allow some ventilation for proper drying. Also make sure to check the water supply on your washing machine to ensure there is no leaking or dampness. The presence of dampness or actual mold growth should be taken care of as soon as discovered, in order to prevent mold infestations in the future. The areas around the ventilation duct, which leads outside, should also be regularly inspected. It should be cleared of all obstructions in addition to being covered to prevent outside elements from entering. Water damage is a major concern when dealing with mold prevention and the laundry room should be generally examined for stains on the ceilings, drywall, and behind machines. If present, you should have the area inspected by a mold and water damage company in order to check the level of damage present.
Another lesser area of concern is the dryer, where lint can build up. Even though you can easily deal with the lint-catcher, you should also check the areas around the loading door for lint caught beneath and building up. These areas can catch mold or mildew spores, which are difficult to remove. Whenever you think you have smelt or seen mold or mustiness, try to ensure that your working areas are clean and dry in order to prevent mold. The more areas that are bleached, dried, and constantly dusted, the less you have to worry about.
If you have mold or water damage, call Restoration Local 24/7 at 1-888-443-3110 for a free estimate!