What Are the Causes of Toilet Overflowing and How Do You Fix It?
Sewage Cleanup, Water Damage

What Are the Causes of Toilet Overflowing and How Do You Fix It?

Everybody strives to have a functioning home at all times, but from time to time, one or two appliances fail. It is very hard to predict when or where a fault will occur, hence it’s always crucial that we have the basic skills to deal with home issues. It is advisable to equip yourself with some information as a homeowner bearing in mind that toilet overflow is normal yet very embarrassing especially if it occurs when you have visitors. One of the most frustrating instances in a home is experiencing a toilet overflow. This can bring diseases or discomfort to the households whenever it occurs. Knowing the causes, effects and how to handle the failure will save you a lot of cleaning to do and the time that could have been used to remove all the water from your floor.

Most Common Causes and Their Solutions

Status of the Chain

The chain that connects the flush lever to the flapper might be broken, too long or loose, a situation that prevents the flap from lifting up high enough to allow water in the tank. This causes the toilet flushing system to fail. In that case, the chain needs to either be shortened or replaced. The flapper, on the other hand, might be in bad shape due to wear, and it will obviously need to be replaced as soon as possible. It is important to check if the water valve was accidentally interfered with, especially if it is too low or turned off. Turning the valve up may solve the problem. If by trying to stop the overflowing toilet on your own does not work, then is time to call a qualified plumber for professional help.

Clogged Toilet

Using too much toilet paper or trying to flush solid, big and insoluble objects down the toilet other than regular toilet tissue can lead to clogging in pipes, hence resulting to toilet overflowing. Flushing things like paper towels, wet wipes, diapers, sanitary towels and excess hair from a combs or hairbrushes are all common culprits behind toilet blockages. Mineral deposits found in hard water can build up in the drainage valves and pipes, resulting to narrowing of the drain. The narrow drain prevents solid waste from passing through. If the clog is caused by a simple blockage in the pipe that is near to the toilet, you can clear the blockage using a toilet auger or a plunger. If using a plunger is unsuccessful, you can use an auger to eliminate the problem by inserting it into the toilet hole then gently hauling it to clear the blockage.

The Float Position

When you flush water after using the toilet, the tank is supposed to fill until the water level is slightly below the overflow pipe. If water goes beyond this level, then the float is too high for the pump. This can be tested by flushing the toilet a few times to note where the water stops. The problem can be easily fixed by bending the rod connecting the float to the pump. This will signal the pump to turn off as soon as possible. If the arm does not bend, then it might be time to give your plumber a call before the problem escalates.

It is very common for people to think that they can handle the plumbing duties around the house. While some issues are easy DIY, the job can get messy especially when it comes to the toilet. In such instances, an experienced professional is the best person to completely solve the issue. You are advised to immediately turn off the main water supply to reduce the damage caused by the overflowing toilet so that it does not cause more problems. However, it is important to understand the basic principle of operation of the toilet to help you before the plumber arrives.

No Comments

Post A Comment